Forum Pplware

Versão Completa: MacBook Pro 15" 2008
Está de momento a ver uma versão reduzida do nosso conteúdo. Ver versão completa com o formato adequado.
Boas,

Tenho um MacBook Pro de 15" de 2008 (A1260).
Neste sábado estava a usar o portátil. Decidi sair um pouco para ver a volta a portugal, por isso fechei a tampa, ficando o Mac em Pausa.
Acontece que nunca mais ligou.
Ao carregar no botão de ligar apenas acende a luz frontal e um barulho muito rápido, parece que tenta arrancar.
Não faz os beeps, pois pensei que seria a Logic Board;
Não dá o toque de arranque;
Tirei as memórias e quando ligo fica igual;
Já tentei todas as combinações de teclas, até para arrancar em rede, com cabo firewire;
Tentei SMC e PRAM mas além de não resultar, não parece que as combinações estejam a ser executadas;
até consultei um manual para desligar a bateria que controla o relógio...
Sempre igual.
A bateria não é a original pois a original tinha acabado os ciclos e comprei uma na net.
Já tentei sem bateria, com bateria e com a bateria antiga.
Se alguém já passou pelo mesmo ou alguém que saiba qual o problema e se é possível resolver, agradeço imenso pois uso este Mac para trabalhar...
já tentaste clonar o disco para um externo e arrancar por ele ?

ou arrancar por uma instalação nova , de um disco externo ?
ja viste o disco noutro mac a ver se nao esta corrompido ?
Tenta isto:
1(reset SMC)
  1. Shut down the computer completely.
  2. Plug in your AC adapter and make sure it’s delivering power.
  3. Using the built-in keyboard, press and hold the Left Shift, Command, Optionand Power Button at the same time.
  4. Release all the keys at the same time.
  5. Press the power button to power on your computer.

2(safe mode)
  1. Turn your computer completely off.
  2. Using the built-in keyboard (laptops only) press and hold the Shift key.
  3. Power on the computer.
  4. Continue holding the Shift key until the Apple logo appears.
  5. Release the Shift key.


http://computers.tutsplus.com/tutorials/...-mac-44524
("too lazy" para traduzir)

Tenta isto:

1(reset SMC)

  1. Shut down the computer completely.
  2. Plug in your AC adapter and make sure it’s delivering power.
  3. Using the built-in keyboard, press and hold the Left Shift, Command, Optionand Power Button at the same time.
  4. Release all the keys at the same time.
  5. Press the power button to power on your computer.


2(safe mode)

  1. Turn your computer completely off.
  2. Using the built-in keyboard (laptops only) press and hold the Shift key.
  3. Power on the computer.
  4. Continue holding the Shift key until the Apple logo appears.
  5. Release the Shift key.




http://computers.tutsplus.com/tutorials/...-mac-44524
("too lazy" para traduzir)
(05-08-2014 18:59)Alenka Escreveu: [ -> ]já tentaste clonar o disco para um externo e arrancar por ele ?

ou arrancar por uma instalação nova , de um disco externo ?
ja viste o disco noutro mac a ver se nao esta corrompido ?
Nem sequer me deixa arrancar com o DVD de instalação.
Vou tentar retirar o disco.

(05-08-2014 19:27)eSkiSo Escreveu: [ -> ]Tenta isto:
1(reset SMC)
  1. Shut down the computer completely.
  2. Plug in your AC adapter and make sure it’s delivering power.
  3. Using the built-in keyboard, press and hold the Left Shift, Command, Optionand Power Button at the same time.
  4. Release all the keys at the same time.
  5. Press the power button to power on your computer.

2(safe mode)
  1. Turn your computer completely off.
  2. Using the built-in keyboard (laptops only) press and hold the Shift key.
  3. Power on the computer.
  4. Continue holding the Shift key until the Apple logo appears.
  5. Release the Shift key.


http://computers.tutsplus.com/tutorials/...-mac-44524
("too lazy" para traduzir)

Tenta isto:

1(reset SMC)

  1. Shut down the computer completely.
  2. Plug in your AC adapter and make sure it’s delivering power.
  3. Using the built-in keyboard, press and hold the Left Shift, Command, Optionand Power Button at the same time.
  4. Release all the keys at the same time.
  5. Press the power button to power on your computer.


2(safe mode)

  1. Turn your computer completely off.
  2. Using the built-in keyboard (laptops only) press and hold the Shift key.
  3. Power on the computer.
  4. Continue holding the Shift key until the Apple logo appears.
  5. Release the Shift key.




http://computers.tutsplus.com/tutorials/...-mac-44524
("too lazy" para traduzir)
Já tentei isso tudo mas, fico com a impressão que o computador nem aceita as combinações de teclas.
URL's de Referência