Depois de fazer o update a v15.0 do Kodi não arranca

[jmpnm]

Boas,

Mais valia estar quieto....no rasp 1 fiz o update do pipplware que incluia o update do kodi para a v15.0 mas depois disso o Kodi não arranca.

O log do crash está em http://goo.gl/zfsW6j se me pudessem dar um ajudinha agradecia.

Obrigado desde já.

Ab

JMag

[dsantos]

Boas,

No log tem dois erros diferentes por falta de ficheiros:
...

1. 19:33:01 T:3034537984   ERROR: CSettings: unable to load settings from special://masterprofile/guisettings.xml, creating new default settings
   
   

...

1. 19:33:02 T:3034537984   ERROR: SQL: SQL error or missing database
   
   

...

É muito provável que tenha havido corrupção de ficheiros ou o cartão esteja danificado. Pelo dmesg deve dar para confirmar.

[jmpnm]

Podes me dar um dica de como usar esse comando?...não percebo muito de Linux.

[finas]

Boas pessoal vou aproveitar este tópico e reportar que quando actualizei o kodi para a versão 15 através do update system do pipplware o meu kodi ficou apenas com a linguagem inglês. Mesmo quando tento mudar só me dá a hipótese de inglês.
Aconteceu a mais alguém?

[dsantos]

@jmpnm o comando é:
dmesg

Faz output de /var/log/messages, só a parte referente ao ultimo boot. É mais só para ver se são ficheiros corrompidos ou o cartão danificado, porque o profile do Kodi já não deves conseguir recuperar só vendo a pasta /home/pi/.kodi a ver o que se pode aproveitar.

@finas
O Kodi agora usa addons para as diferentes línguas, para as traduções serem independentes do resto do programa. Se estiveres em Portugal ele devia instalar o addon português e seleccionar automaticamente. Experimenta instalar o addon de língua portuguesa.

[jmpnm]

pi@raspberrypi ~ $ dmesg

[ 0.000000] Booting Linux on physical CPU 0x0

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Initializing cgroup subsys cpuacct

[ 0.000000] Linux version 4.0.8+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 2014 0303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #8 05 PREEMPT Thu Jul 16 18:09:07 BST 2015

[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr =00c5387d

[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruc tion cache

[ 0.000000] Machine model: Raspberry Pi Model B Plus Rev 1.2

[ 0.000000] cma: Reserved 8 MiB at 0x0f800000

[ 0.000000] Memory policy: Data cache writeback

[ 0.000000] On node 0 totalpages: 65536

[ 0.000000] free_area_init_node: node 0, pgdat c08732bc, node_mem_map cf5b300 0

[ 0.000000] Normal zone: 576 pages used for memmap

[ 0.000000] Normal zone: 0 pages reserved

[ 0.000000] Normal zone: 65536 pages, LIFO batch:15

[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

[ 0.000000] pcpu-alloc: [0] 0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 64960

[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0x10 bcm2708.serial=0x80b2ee4f smsc95x x.macaddr=B8:27:EB:B2:EE:4F bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 bcm2708.di sk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=25000 0000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 r ootfstype=ext4 elevator=deadline rootwait quiet

[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[ 0.000000] Memory: 241928K/262144K available (6063K kernel code, 333K rwdata , 1908K rodata, 348K init, 720K bss, 12024K reserved, 8192K cma-reserved)

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)

[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)

[ 0.000000] .text : 0xc0008000 - 0xc07d0fe0 (7972 kB)

[ 0.000000] .init : 0xc07d1000 - 0xc0828000 ( 348 kB)

[ 0.000000] .data : 0xc0828000 - 0xc087b674 ( 334 kB)

[ 0.000000] .bss : 0xc087b674 - 0xc092f778 ( 721 kB)

[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[ 0.000000] Preemptible hierarchical RCU implementation.

[ 0.000000] Additional per-CPU info printed with stalls.

[ 0.000000] NR_IRQS:522

[ 0.000024] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2 147483648000ns

[ 0.000077] Switching to timer-based delay loop, resolution 1000ns

[ 0.000363] Console: colour dummy device 80x30

[ 0.000595] console [tty1] enabled

[ 0.000628] Calibrating delay loop (skipped), value calculated using timer fr equency.. 2.00 BogoMIPS (lpj=10000)

[ 0.000655] pid_max: default: 32768 minimum: 301

[ 0.000981] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.001010] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.002032] Initializing cgroup subsys blkio

[ 0.002077] Initializing cgroup subsys memory

[ 0.002115] Initializing cgroup subsys devices

[ 0.002146] Initializing cgroup subsys freezer

[ 0.002178] Initializing cgroup subsys net_cls

[ 0.002275] CPU: Testing write buffer coherency: ok

[ 0.002360] ftrace: allocating 19592 entries in 58 pages

[ 0.108110] Setting up static identity map for 0x57da18 - 0x57da50

[ 0.110673] devtmpfs: initialized

[ 0.117379] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5

[ 0.119532] pinctrl core: initialized pinctrl subsystem

[ 0.123966] NET: Registered protocol family 16

[ 0.129597] DMA: preallocated 4096 KiB pool for atomic coherent allocations

[ 0.131172] bcm2708.uart_clock = 3000000

[ 0.135599] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[ 0.135626] hw-breakpoint: maximum watchpoint size is 4 bytes.

[ 0.135801] Serial: AMBA PL011 UART driver

[ 0.136074] 20201000.uart: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev2

[ 0.136442] console [ttyAMA0] enabled

[ 0.137381] bcm2708_vcio 2000b880.mailbox: mailbox at f200b880

[ 0.200272] bcm2708-dmaengine 20007000.dma: DMA legacy API manager at f200700 0, dmachans=0x7f35

[ 0.200922] bcm2708-dmaengine 20007000.dma: Load BCM2835 DMA engine driver

[ 0.200952] bcm2708-dmaengine 20007000.dma: dma_debug:0

[ 0.201103] bcm_power: Broadcom power driver

[ 0.201127] bcm_power_open() -> 0

[ 0.201141] bcm_power_request(0, 8)

[ 0.226835] bcm_mailbox_read -> 00000080, 0

[ 0.226859] bcm_power_request -> 0

[ 0.227670] SCSI subsystem initialized

[ 0.228038] usbcore: registered new interface driver usbfs

[ 0.228258] usbcore: registered new interface driver hub

[ 0.228471] usbcore: registered new device driver usb

[ 0.230753] Switched to clocksource stc

[ 0.258493] FS-Cache: Loaded

[ 0.258882] CacheFiles: Loaded

[ 0.275458] NET: Registered protocol family 2

[ 0.276922] TCP established hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.276994] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.277055] TCP: Hash tables configured (established 2048 bind 2048)

[ 0.277148] TCP: reno registered

[ 0.277176] UDP hash table entries: 256 (order: 0, 4096 bytes)

[ 0.277212] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[ 0.277553] NET: Registered protocol family 1

[ 0.278232] RPC: Registered named UNIX socket transport module.

[ 0.278261] RPC: Registered udp transport module.

[ 0.278274] RPC: Registered tcp transport module.

[ 0.278287] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.279602] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters ava ilable

[ 0.281218] futex hash table entries: 256 (order: -1, 3072 bytes)

[ 0.297770] VFS: Disk quotas dquot_6.5.2

[ 0.298185] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.301055] FS-Cache: Netfs 'nfs' registered for caching

[ 0.302819] NFS: Registering the id_resolver key type

[ 0.302920] Key type id_resolver registered

[ 0.302940] Key type id_legacy registered

[ 0.306652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)

[ 0.307072] io scheduler noop registered

[ 0.307112] io scheduler deadline registered (default)

[ 0.307521] io scheduler cfq registered

[ 0.309945] BCM2708FB: allocated DMA memory 4fc00000

[ 0.310027] BCM2708FB: allocated DMA channel 0 @ f2007000

[ 0.361307] Console: switching to colour frame buffer device 240x67

[ 0.401130] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled

[ 0.401562] uart-pl011 20201000.uart: no DMA platform data

[ 0.401955] KGDB: Registered I/O driver kgdboc

[ 0.432011] vc-cma: Videocore CMA driver

[ 0.432052] vc-cma: vc_cma_base = 0x00000000

[ 0.432069] vc-cma: vc_cma_size = 0x00000000 (0 MiB)

[ 0.432084] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)

[ 0.432464] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000 000(512 MiB)

[ 0.455134] brd: module loaded

[ 0.466618] loop: module loaded

[ 0.467814] vchiq: vchiq_init_state: slot_zero = 0xcfc80000, is_master = 0

[ 0.469418] Loading iSCSI transport class v2.0-870.

[ 0.471429] usbcore: registered new interface driver smsc95xx

[ 0.471582] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[ 0.672188] Core Release: 2.80a

[ 0.672235] Setting default values for core params

[ 0.672297] Finished setting default values for core params

[ 0.872799] Using Buffer DMA mode

[ 0.872841] Periodic Transfer Interrupt Enhancement - disabled

[ 0.872857] Multiprocessor Interrupt Enhancement - disabled

[ 0.872875] OTG VER PARAM: 0, OTG VER FLAG: 0

[ 0.872899] Dedicated Tx FIFOs mode

[ 0.873461] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xcfc 14000 dma = 0x4fc14000 len=9024

[ 0.873506] FIQ FSM acceleration enabled for :

[ 0.873506] Non-periodic Split Transactions

[ 0.873506] Periodic Split Transactions

[ 0.873506] High-Speed Isochronous Endpoints

[ 0.873545] dwc_otg: Microframe scheduler enabled

[ 0.873635] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc0416de0

[ 0.873659] WARN::hcd_init_fiq:413: FIQ ASM at 0xc04170b8 length 36

[ 0.873700] WARN::hcd_init_fiq:438: MPHI regs_base at 0xd0896000

[ 0.873769] dwc_otg 20980000.usb: DWC OTG Controller

[ 0.873848] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1

[ 0.873931] dwc_otg 20980000.usb: irq 32, io mem 0x00000000

[ 0.873984] Init: Port Power? op_state=1

[ 0.873998] Init: Power Port (0)

[ 0.874514] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 0.874548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1

[ 0.874573] usb usb1: Product: DWC OTG Controller

[ 0.874594] usb usb1: Manufacturer: Linux 4.0.8+ dwc_otg_hcd

[ 0.874618] usb usb1: SerialNumber: 20980000.usb

[ 0.875901] hub 1-0:1.0: USB hub found

[ 0.876029] hub 1-0:1.0: 1 port detected

[ 0.876809] dwc_otg: FIQ enabled

[ 0.876837] dwc_otg: NAK holdoff enabled

[ 0.876853] dwc_otg: FIQ split-transaction FSM enabled

[ 0.876940] Module dwc_common_port init

[ 0.877639] usbcore: registered new interface driver usb-storage

[ 0.878139] mousedev: PS/2 mouse device common for all mice

[ 0.879666] bcm2835-cpufreq: min=700000 max=900000

[ 0.880104] Driver 'mmcblk' needs updating - please use bus_type methods

[ 0.880243] sdhci: Secure Digital Host Controller Interface driver

[ 0.880263] sdhci: Copyright© Pierre Ossman

[ 0.881124] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0

[ 0.881165] mmc-bcm2835 20300000.mmc: DMA channels allocated

[ 0.921268] sdhci-pltfm: SDHCI platform and OF driver helper

[ 0.922116] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.922459] hidraw: raw HID events driver © Jiri Kosina

[ 0.922825] usbcore: registered new interface driver usbhid

[ 0.922850] usbhid: USB HID core driver

[ 0.923323] TCP: cubic registered

[ 0.923364] Initializing XFRM netlink socket

[ 0.923435] NET: Registered protocol family 17

[ 0.923708] Key type dns_resolver registered

[ 0.932739] registered taskstats version 1

[ 0.933149] vc-sm: Videocore shared memory driver

[ 0.933183] [vc_sm_connected_init]: start

[ 0.939802] [vc_sm_connected_init]: end - returning 0

[ 0.942564] Waiting for root device /dev/mmcblk0p2...

[ 0.969255] mmc0: host does not support reading read-only switch, assuming wr ite-enable

[ 0.971697] mmc0: new high speed SDHC card at address 0007

[ 0.972574] mmcblk0: mmc0:0007 SD8GB 7.42 GiB

[ 0.974520] mmcblk0: p1 p2

[ 1.055993] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em

[ 1.056040] EXT4-fs (mmcblk0p2): write access will be enabled during recovery

[ 1.071147] Indeed it is in host mode hprt0 = 00021501

[ 1.251022] usb 1-1: new high-speed USB device number 2 using dwc_otg

[ 1.251255] Indeed it is in host mode hprt0 = 00001101

[ 1.451281] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

[ 1.451325] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.452754] hub 1-1:1.0: USB hub found

[ 1.452965] hub 1-1:1.0: 5 ports detected

[ 1.731040] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[ 1.831452] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[ 1.831498] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0

[ 1.834780] smsc95xx v1.0.4

[ 1.896382] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb- 1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b2:ee:4f

[ 2.400967] usb 1-1.2: new low-speed USB device number 4 using dwc_otg

[ 2.520741] usb 1-1.2: New USB device found, idVendor=0c40, idProduct=8000

[ 2.520865] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =0

[ 2.520893] usb 1-1.2: Product: 2.4GHz receiver

[ 2.520916] usb 1-1.2: Manufacturer: ELMCU

[ 2.540027] input: ELMCU 2.4GHz receiver as /devices/platform/soc/20980000.us b/usb1/1-1/1-1.2/1-1.2:1.0/0003:0C40:8000.0001/input/input0

[ 2.591353] hid-generic 0003:0C40:8000.0001: input,hidraw0: USB HID v1.11 Key board [ELMCU 2.4GHz receiver] on usb-20980000.usb-1.2/input0

[ 2.614547] input: ELMCU 2.4GHz receiver as /devices/platform/soc/20980000.us b/usb1/1-1/1-1.2/1-1.2:1.1/0003:0C40:8000.0002/input/input1

[ 2.671695] hid-generic 0003:0C40:8000.0002: input,hidraw1: USB HID v1.11 Mou se [ELMCU 2.4GHz receiver] on usb-20980000.usb-1.2/input1

[ 4.886999] EXT4-fs (mmcblk0p2): recovery complete

[ 4.896090] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null)

[ 4.896223] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.

[ 4.897522] devtmpfs: mounted

[ 4.898883] Freeing unused kernel memory: 348K (c07d1000 - c0828000)

[ 6.986873] udevd[161]: starting version 175

[ 7.176092] random: nonblocking pool is initialized

[ 16.515707] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[ 17.024523] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[ 29.086260] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[ 30.578860] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE 1

[ 38.909624] input: python-uinput as /devices/virtual/input/input2

[ 39.786659] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:1 02396k SSFS

[ 100.534739] input: python-uinput as /devices/virtual/input/input3

[ 239.857001] input: python-uinput as /devices/virtual/input/input4

[dsantos]

Não parece estar danificado o cartão, provavelmente ouve apenas corrupção de alguns ficheiros.

Fizeste o update por terminal ? Se sim o Kodi estava em execução ? Não tens um backup recente para restaurar ?
Senão a única solução que estou a ver é mover a pasta /home/pi/.kodi e abrir o Kodi para ele criar um novo directório .kodi e configurar uma conta nova. E depois é ver o que tinhas na pasta antiga e ver o que dá para restaurar para a nova.

[jmpnm]

fiz o update pelo "update system" logo depois de ligar o rasp pelo que o kodi não estava em execução, infelizmente não tenho backup recente :-(

Dizes tirar a pasta  /home/pi/.kodi para o pc e depois arrancar o kodi a partir da ES?

[jmpnm]

existe uma pasta \\home\kodi e outra \\home\pi\.kodi
Apago as duas?

[finas]

(29-07-2015 22:51)dsantos Escreveu:  @finas
O Kodi agora usa addons para as diferentes línguas, para as traduções serem independentes do resto do programa. Se estiveres em Portugal ele devia instalar o addon português e seleccionar automaticamente. Experimenta instalar o addon de língua portuguesa.

Pois isso foi o que pensei fazer, o problema é que quando vou ao repositório oficial do kodi para fazer download do add-on da língua portuguesa aparece me os vários tipos de add-ons (vídeo, lyrics, music, etc) mas nada de add-on de linguagem... Já forcei a atualização de todos os repositórios e nada...