Colocar Resposta 
 
Avaliação do Tópico:
  • 0 votos - 0 Média
  • 1
  • 2
  • 3
  • 4
  • 5
Problemas com disco externo
07-07-2009, 23:54
Mensagem: #12
RE: Problemas com disco externo
Nop, quando o ligo em linux arranca logo e trabalha às mil maravilhas.
Houve alguns erros, penso eu, em
[ 10.042169] Initializing USB Mass Storage driver...
[ 10.042826] usb-storage: probe of 5-1:1.0 failed with error -5
[ 10.042912] usb-storage: probe of 5-1:1.1 failed with error -5
[ 10.044750] usb-storage: probe of 5-1:1.2 failed with error -1
[ 10.044772] usbcore: registered new interface driver usb-storage
[ 10.044794] USB Mass Storage support registered

mas também não sei se é isto, porque os valores apresentados ao fazer dmesg nunca mais acabam lol
De qualquer forma aqui fica a lista completa

[ 0.513048] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.513050] pci 0000:00:1c.0: IO window: disabled
[ 0.513054] pci 0000:00:1c.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.513058] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.513063] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.513064] pci 0000:00:1c.1: IO window: disabled
[ 0.513069] pci 0000:00:1c.1: MEM window: 0xfe000000-0xfe0fffff
[ 0.513072] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.513078] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.513079] pci 0000:00:1c.2: IO window: disabled
[ 0.513083] pci 0000:00:1c.2: MEM window: disabled
[ 0.513087] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.513092] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.513094] pci 0000:00:1c.3: IO window: 0xb000-0xbfff
[ 0.513099] pci 0000:00:1c.3: MEM window: 0xfe100000-0xfe1fffff
[ 0.513102] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.513108] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 0.513110] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.513115] pci 0000:00:1c.4: MEM window: 0xfe200000-0xfe9fffff
[ 0.513118] pci 0000:00:1c.4: PREFETCH window: 0x000000f5d00000-0x000000f7cfffff
[ 0.513124] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 0.513125] pci 0000:00:1c.5: IO window: disabled
[ 0.513129] pci 0000:00:1c.5: MEM window: disabled
[ 0.513133] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.513138] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[ 0.513140] pci 0000:00:1e.0: IO window: disabled
[ 0.513144] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 0.513148] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.513159] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.513162] pci 0000:00:01.0: setting latency timer to 64
[ 0.513168] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.513172] pci 0000:00:1c.0: setting latency timer to 64
[ 0.513178] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.513182] pci 0000:00:1c.1: setting latency timer to 64
[ 0.513189] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.513192] pci 0000:00:1c.2: setting latency timer to 64
[ 0.513199] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.513203] pci 0000:00:1c.3: setting latency timer to 64
[ 0.513209] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.513212] pci 0000:00:1c.4: setting latency timer to 64
[ 0.513218] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.513222] pci 0000:00:1c.5: setting latency timer to 64
[ 0.513227] pci 0000:00:1e.0: setting latency timer to 64
[ 0.513230] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.513232] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.513234] bus: 01 index 0 io port: [0xa000-0xafff]
[ 0.513236] bus: 01 index 1 mmio: [0xf7e00000-0xfdefffff]
[ 0.513237] bus: 01 index 2 mmio: [0xd5d00000-0xf5cfffff]
[ 0.513239] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.513241] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.513242] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.513244] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.513245] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.513247] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.513248] bus: 03 index 1 mmio: [0xfe000000-0xfe0fffff]
[ 0.513250] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.513251] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.513253] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.513254] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.513256] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.513257] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.513259] bus: 05 index 0 io port: [0xb000-0xbfff]
[ 0.513260] bus: 05 index 1 mmio: [0xfe100000-0xfe1fffff]
[ 0.513262] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.513263] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.513265] bus: 06 index 0 io port: [0xc000-0xcfff]
[ 0.513266] bus: 06 index 1 mmio: [0xfe200000-0xfe9fffff]
[ 0.513268] bus: 06 index 2 mmio: [0xf5d00000-0xf7cfffff]
[ 0.513270] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.513271] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.513273] bus: 08 index 1 mmio: [0x0-0x0]
[ 0.513274] bus: 08 index 2 mmio: [0x0-0x0]
[ 0.513275] bus: 08 index 3 mmio: [0x0-0x0]
[ 0.513277] bus: 09 index 0 mmio: [0x0-0x0]
[ 0.513278] bus: 09 index 1 mmio: [0xfea00000-0xfeafffff]
[ 0.513280] bus: 09 index 2 mmio: [0x0-0x0]
[ 0.513282] bus: 09 index 3 io port: [0x00-0xffff]
[ 0.513283] bus: 09 index 4 mmio: [0x000000-0xffffffff]
[ 0.513289] NET: Registered protocol family 2
[ 0.528040] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.528227] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.528502] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.528645] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.528647] TCP reno registered
[ 0.532049] NET: Registered protocol family 1
[ 0.532136] checking if image is initramfs... it is
[ 1.037606] Freeing initrd memory: 7377k freed
[ 1.037641] Simple Boot Flag at 0x52 set to 0x1
[ 1.037792] cpufreq: No nForce2 chipset.
[ 1.037912] audit: initializing netlink socket (disabled)
[ 1.037933] type=2000 audit(1246996030.037:1): initialized
[ 1.044096] highmem bounce pool size: 64 pages
[ 1.044100] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.045143] VFS: Disk quotas dquot_6.5.1
[ 1.045189] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.045668] fuse init (API version 7.10)
[ 1.045732] msgmni has been set to 1672
[ 1.045867] alg: No test for stdrng (krng)
[ 1.045875] io scheduler noop registered
[ 1.045877] io scheduler anticipatory registered
[ 1.045879] io scheduler deadline registered
[ 1.045889] io scheduler cfq registered (default)
[ 1.115041] pci 0000:01:00.0: Boot video device
[ 1.118005] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.118037] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.118058] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.118067] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.118078] pci_express 0000:00:01.0:pcie02: allocate port service
[ 1.118087] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.118127] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.118158] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.118179] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.118190] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.118199] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.118248] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.118278] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.118300] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[ 1.118310] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.118320] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.118371] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.118401] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.118423] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X
[ 1.118433] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.118443] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.118491] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.118521] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.118543] pcieport-driver 0000:00:1c.3: irq 2299 for MSI/MSI-X
[ 1.118553] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.118563] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.118611] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.118642] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.118664] pcieport-driver 0000:00:1c.4: irq 2298 for MSI/MSI-X
[ 1.118674] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.118684] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.118693] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.118742] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.118773] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.118795] pcieport-driver 0000:00:1c.5: irq 2297 for MSI/MSI-X
[ 1.118805] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.118815] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.118825] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.118884] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.119283] pciehp 0000:00:01.0:pcie02: HPC vendor_id 8086 device_id 2a01 ss_vid 0 ss_did 0
[ 1.119310] pciehp 0000:00:01.0:pcie02: service driver pciehp loaded
[ 1.119681] pciehp 0000:00:1c.4:pcie02: HPC vendor_id 8086 device_id 2847 ss_vid 0 ss_did 0
[ 1.119707] pciehp 0000:00:1c.4:pcie02: service driver pciehp loaded
[ 1.120074] pciehp 0000:00:1c.5:pcie02: HPC vendor_id 8086 device_id 2849 ss_vid 0 ss_did 0
[ 1.120102] pciehp 0000:00:1c.5:pcie02: service driver pciehp loaded
[ 1.120109] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.120266] ACPI: AC Adapter [AC0] (on-line)
[ 1.120383] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.120439] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.120441] ACPI: Power Button (FF) [PWRF]
[ 1.120485] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.120492] ACPI: Sleep Button (CM) [SLPB]
[ 1.120523] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.120684] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.122160] ACPI: Lid Switch [LID]
[ 1.122743] ACPI: SSDT BFFB63A0, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 1.123177] ACPI: SSDT BFFB6700, 0712 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 1.124098] Monitor-Mwait will be used to enter C-1 state
[ 1.124101] Monitor-Mwait will be used to enter C-2 state
[ 1.124112] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.124130] processor ACPI_CPU:00: registered as cooling_device0
[ 1.124133] ACPI: Processor [P001] (supports 8 throttling states)
[ 1.124417] ACPI: SSDT BFFB62D0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 1.124805] ACPI: SSDT BFFB6670, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 1.125777] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.125791] processor ACPI_CPU:01: registered as cooling_device1
[ 1.125794] ACPI: Processor [P002] (supports 8 throttling states)
[ 1.129947] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.130814] ACPI: Thermal Zone [THRM] (58 C)
[ 1.130856] isapnp: Scanning for PnP cards...
[ 1.483785] isapnp: No Plug & Play device found
[ 1.492171] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.493012] brd: module loaded
[ 1.493249] loop: module loaded
[ 1.493305] Fixed MDIO Bus: probed
[ 1.493309] PPP generic driver version 2.4.2
[ 1.493353] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.493376] Driver 'sd' needs updating - please use bus_type methods
[ 1.493384] Driver 'sr' needs updating - please use bus_type methods
[ 1.493414] ahci 0000:00:1f.2: version 3.0
[ 1.493425] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.493452] ahci 0000:00:1f.2: irq 2296 for MSI/MSI-X
[ 1.493505] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.493508] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
[ 1.493512] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.493735] scsi0 : ahci
[ 1.493801] scsi1 : ahci
[ 1.493849] scsi2 : ahci
[ 1.493947] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 2296
[ 1.493950] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 2296
[ 1.493952] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 2296
[ 1.812014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.813085] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1.813129] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1.813131] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.813461] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[ 1.813463] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.814404] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1.814448] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1.814450] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.814788] ata1.00: configured for UDMA/133
[ 2.148012] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.484012] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.500085] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
[ 2.500155] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.500168] sd 0:0:0:0: [sda] Write Protect is off
[ 2.500169] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.500189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.500230] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.500241] sd 0:0:0:0: [sda] Write Protect is off
[ 2.500243] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.500261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.500264] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2.590869] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.590899] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.590936] ata_piix 0000:00:1f.1: version 2.12
[ 2.590942] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.590970] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.591023] scsi3 : ata_piix
[ 2.591066] scsi4 : ata_piix
[ 2.591590] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.591592] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.768337] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L632H, AS02, max UDMA/33
[ 2.800282] ata4.00: configured for UDMA/33
[ 2.802234] ata5: port disabled. ignoring.
[ 2.804624] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H AS02 PQ: 0 ANSI: 5
[ 2.816186] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.816188] Uniform CD-ROM driver Revision: 3.20
[ 2.816251] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.816278] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.816810] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.816824] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.816834] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.816837] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.816881] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.820772] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.820778] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.820788] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
[ 2.832006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.832055] usb usb1: configuration #1 chosen from 1 choice
[ 2.832076] hub 1-0:1.0: USB hub found
[ 2.832083] hub 1-0:1.0: 4 ports detected
[ 2.832166] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.832175] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.832178] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.832212] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.836122] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.836127] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.836139] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000
[ 2.848005] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.848055] usb usb2: configuration #1 chosen from 1 choice
[ 2.848076] hub 2-0:1.0: USB hub found
[ 2.848081] hub 2-0:1.0: 6 ports detected
[ 2.848154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.848167] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.848181] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.848186] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.848189] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.848223] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.848249] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
[ 2.848309] usb usb3: configuration #1 chosen from 1 choice
[ 2.848328] hub 3-0:1.0: USB hub found
[ 2.848333] hub 3-0:1.0: 2 ports detected
[ 2.848397] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.848402] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.848404] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.848434] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.848459] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[ 2.848512] usb usb4: configuration #1 chosen from 1 choice
[ 2.848531] hub 4-0:1.0: USB hub found
[ 2.848536] hub 4-0:1.0: 2 ports detected
[ 2.848600] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.848605] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.848607] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.848637] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.848656] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[ 2.848711] usb usb5: configuration #1 chosen from 1 choice
[ 2.848729] hub 5-0:1.0: USB hub found
[ 2.848734] hub 5-0:1.0: 2 ports detected
[ 2.848796] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.848801] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.848804] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.848836] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.848862] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[ 2.848917] usb usb6: configuration #1 chosen from 1 choice
[ 2.848935] hub 6-0:1.0: USB hub found
[ 2.848940] hub 6-0:1.0: 2 ports detected
[ 2.849014] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.849019] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.849022] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.849054] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.849074] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 2.849128] usb usb7: configuration #1 chosen from 1 choice
[ 2.849146] hub 7-0:1.0: USB hub found
[ 2.849151] hub 7-0:1.0: 2 ports detected
[ 2.849257] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.851061] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.851846] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.851849] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.851851] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.851853] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.851855] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.853030] mice: PS/2 mouse device common for all mice
[ 2.869051] rtc_cmos 00:03: RTC can wake from S4
[ 2.869075] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.869097] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.869144] device-mapper: uevent: version 1.0.3
[ 2.869207] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.869262] device-mapper: multipath: version 1.0.5 loaded
[ 2.869264] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.869319] EISA: Probing bus 0 at eisa.0
[ 2.869344] EISA: Detected 0 cards.
[ 2.869421] cpuidle: using governor ladder
[ 2.869490] cpuidle: using governor menu
[ 2.869877] TCP cubic registered
[ 2.869953] NET: Registered protocol family 10
[ 2.870282] lo: Disabled Privacy Extensions
[ 2.870540] NET: Registered protocol family 17
[ 2.870553] Bluetooth: L2CAP ver 2.11
[ 2.870554] Bluetooth: L2CAP socket layer initialized
[ 2.870556] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.870558] Bluetooth: SCO socket layer initialized
[ 2.870582] Bluetooth: RFCOMM socket layer initialized
[ 2.870587] Bluetooth: RFCOMM TTY layer initialized
[ 2.870589] Bluetooth: RFCOMM ver 1.10
[ 2.871390] Marking TSC unstable due to TSC halts in idle
[ 2.871424] Using IPI No-Shortcut mode
[ 2.871481] registered taskstats version 1
[ 2.871583] Magic number: 1:782:798
[ 2.871652] rtc_cmos 00:03: setting system clock to 2009-07-07 19:47:12 UTC (1246996032)
[ 2.871655] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.871656] EDD information not available.
[ 2.871893] Freeing unused kernel memory: 532k freed
[ 2.871996] Write protecting the kernel text: 4112k
[ 2.872045] Write protecting the kernel read-only data: 1524k
[ 2.901580] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.055186] atl1 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.055197] atl1 0000:02:00.0: setting latency timer to 64
[ 3.055227] atl1 0000:02:00.0: version 2.1.3
[ 3.179720] ohci1394 0000:09:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.232420] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.236478] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 3.375548] usb 1-2: configuration #1 chosen from 1 choice
[ 3.900046] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.941576] PM: Starting manual resume from disk
[ 3.941578] PM: Resume from partition 8:4
[ 3.941579] PM: Checking hibernation image.
[ 3.941733] PM: Resume from disk failed.
[ 3.978185] EXT4-fs: barriers enabled
[ 3.992356] kjournald2 starting. Commit interval 5 seconds
[ 3.992367] EXT4-fs: delayed allocation enabled
[ 3.992368] EXT4-fs: file extents enabled
[ 3.992523] EXT4-fs: mballoc enabled
[ 3.992526] EXT4-fs: mounted filesystem with ordered data mode.
[ 4.056777] usb 5-1: configuration #1 chosen from 1 choice
[ 4.300051] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 4.477761] usb 5-2: configuration #1 chosen from 1 choice
[ 4.552132] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00012835a2]
[ 4.729045] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 4.893187] usb 7-2: configuration #1 chosen from 1 choice
[ 8.899191] udev: starting version 141
[ 9.344447] cfg80211: Calling CRDA to update world regulatory domain
[ 9.439490] iTCO_vendor_support: vendor-support=0
[ 9.489103] sdhci: Secure Digital Host Controller Interface driver
[ 9.489104] sdhci: Copyright© Pierre Ossman
[ 9.525266] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 9.525268] ricoh-mmc: Copyright© Philip Langdale
[ 9.525297] ricoh-mmc: Ricoh MMC controller found at 0000:09:01.2 [1180:0843] (rev 12)
[ 9.525312] ricoh-mmc: Controller is now disabled.
[ 9.525969] cfg80211: World regulatory domain updated:
[ 9.525971] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.525973] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.525974] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.525976] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.525978] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.525979] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.572105] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.691554] usbcore: registered new interface driver hiddev
[ 9.705929] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input6
[ 9.706162] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-2/input0
[ 9.706176] usbcore: registered new interface driver usbhid
[ 9.706191] usbhid: v2.6:USB HID core driver
[ 9.753793] Linux agpgart interface v0.103
[ 9.846275] Linux video capture interface: v2.00
[ 10.042169] Initializing USB Mass Storage driver...
[ 10.042826] usb-storage: probe of 5-1:1.0 failed with error -5
[ 10.042912] usb-storage: probe of 5-1:1.1 failed with error -5
[ 10.044750] usb-storage: probe of 5-1:1.2 failed with error -1
[ 10.044772] usbcore: registered new interface driver usb-storage
[ 10.044794] USB Mass Storage support registered.
[ 10.227857] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 10.228053] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
[ 10.228110] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.313925] acpi device:20: registered as cooling_device2
[ 10.314087] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/device:1c/input/input7
[ 10.316098] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.397544] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 10.397557] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.399638] mmc0: SDHCI controller on PCI [0000:09:01.1] using PIO
[ 10.461883] asus-laptop: Asus Laptop Support version 0.42
[ 10.465811] asus-laptop: M51Sn model detected
[ 10.466447] asus-laptop: Brightness ignored, must be controlled by ACPI video driver
[ 10.466475] Registered led device: asus::mail
[ 10.633972] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 10.706322] nvidia: module license 'NVIDIA' taints kernel.
[ 10.718601] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (174f:5a31)
[ 10.730976] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
[ 10.735359] usbcore: registered new interface driver usbserial
[ 10.735387] USB Serial support registered for generic
[ 10.958449] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.958456] nvidia 0000:01:00.0: setting latency timer to 64
[ 10.958718] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 10.960496] usbcore: registered new interface driver uvcvideo
[ 10.960499] USB Video Class driver (v0.1.0)
[ 10.960534] usbcore: registered new interface driver usbserial_generic
[ 10.960536] usbserial: USB Serial Driver core
[ 10.961527] USB Serial support registered for GSM modem (1-port)
[ 10.961574] option 5-1:1.0: GSM modem (1-port) converter detected
[ 10.961701] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 10.961710] option 5-1:1.1: GSM modem (1-port) converter detected
[ 10.962073] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 10.962094] usbcore: registered new interface driver option
[ 10.962096] option: v0.7.2:USB Driver for GSM modems
[ 11.013594] iwlagn: Intel® Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 11.013596] iwlagn: Copyright© 2003-2008 Intel Corporation
[ 11.013669] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.013676] iwlagn 0000:03:00.0: setting latency timer to 64
[ 11.013711] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 11.050711] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 11.050769] iwlagn 0000:03:00.0: irq 2295 for MSI/MSI-X
[ 11.051511] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.265603] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.265662] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.299347] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
[ 11.523606] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
[ 11.563939] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 11.894972] lp: driver loaded but no devices found
[ 11.982519] Adding 522104k swap on /dev/sda4. Priority:-1 extents:1 across:522104k
[ 12.417029] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x01bba000
[ 12.500098] Clocksource tsc unstable (delta = -80986697 ns)
[ 12.511394] EXT4 FS on sda6, internal journal on sda6:8
[ 13.599520] type=1505 audit(1246992443.224:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2239
[ 13.632412] type=1505 audit(1246992443.260:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2243
[ 13.632476] type=1505 audit(1246992443.260:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2243
[ 13.632504] type=1505 audit(1246992443.260:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2243
[ 13.632533] type=1505 audit(1246992443.260:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2243
[ 13.723657] type=1505 audit(1246992443.348:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2248
[ 13.723797] type=1505 audit(1246992443.348:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2248
[ 13.743500] type=1505 audit(1246992443.368:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2252
[ 17.760870] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.760872] Bluetooth: BNEP filters: protocol multicast
[ 17.805467] Bridge firewalling registered
[ 18.965755] ppdev: user-space parallel port driver
[ 23.417484] atl1 0000:02:00.0: irq 2294 for MSI/MSI-X
[ 23.417715] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.418251] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 23.504273] iwlagn: Radio disabled by HW RF Kill switch
[ 23.513311] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.849342] PPP BSD Compression module registered
[ 55.890856] PPP Deflate Compression module registered
[ 211.040093] usb 2-4: new high speed USB device using ehci_hcd and address 5
[ 211.301915] usb 2-4: configuration #1 chosen from 1 choice
[ 211.316131] scsi8 : SCSI emulation for USB Mass Storage devices
[ 211.317223] usb-storage: device found at 5
[ 211.317227] usb-storage: waiting for device to settle before scanning
[ 216.316437] usb-storage: device scan complete
[ 216.351785] scsi 8:0:0:0: Direct-Access ST350082 0AS SD25 PQ: 0 ANSI: 0
[ 216.354357] sd 8:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 216.355225] sd 8:0:0:0: [sdb] Write Protect is off
[ 216.355232] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 216.355237] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 216.360524] sd 8:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 216.361331] sd 8:0:0:0: [sdb] Write Protect is off
[ 216.361338] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 216.361344] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 216.361352] sdb: sdb1
[ 216.389287] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 216.389421] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 2435.684026] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 2435.998291] usb 4-2: configuration #1 chosen from 1 choice
[ 2436.068486] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 2436.069393] usbcore: registered new interface driver btusb
[ 2452.895744] iwlagn: Radio Frequency Kill Switch is On:
[ 2452.895750] Kill switch must be turned off for wireless networking to work.
[ 2453.139787] usb 4-2: USB disconnect, address 2
[ 2453.140104] btusb_intr_complete: hci0 urb f324b480 failed to resubmit (19)
[ 2453.140120] btusb_bulk_complete: hci0 urb f324ba80 failed to resubmit (19)
[ 2453.141087] btusb_bulk_complete: hci0 urb f324ba00 failed to resubmit (19)
[ 2453.144381] btusb_send_frame: hci0 urb f1c2c700 submission failed
[14124.755942] usb 2-4: USB disconnect, address 5
[14148.996144] usb 2-4: new high speed USB device using ehci_hcd and address 6
[14149.254663] usb 2-4: configuration #1 chosen from 1 choice
[14149.257384] scsi9 : SCSI emulation for USB Mass Storage devices
[14149.257785] usb-storage: device found at 6
[14149.257789] usb-storage: waiting for device to settle before scanning
[14154.256435] usb-storage: device scan complete
[14154.291804] scsi 9:0:0:0: Direct-Access ST350082 0AS SD25 PQ: 0 ANSI: 0
[14154.293622] sd 9:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[14154.294673] sd 9:0:0:0: [sdb] Write Protect is off
[14154.294680] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
[14154.294686] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[14154.304069] sd 9:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[14154.305142] sd 9:0:0:0: [sdb] Write Protect is off
[14154.305149] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
[14154.305155] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[14154.305165] sdb: sdb1
[14154.344791] sd 9:0:0:0: [sdb] Attached SCSI disk
[14154.344928] sd 9:0:0:0: Attached scsi generic sg2 type 0
jcarvalho@jcarvalho-laptop:~$



Pode, e é quase certo, ter-me escapado qualquer coisa ali pelo meio, porque também isto já é muita areia para a minha camioneta como se costuma dizer.
De qualquer forma obrigado pela ajuda e paciência.
Procurar todas as mensagens deste utilizador
Citar esta mensagem numa resposta
Colocar Resposta 


Mensagem neste Tópico
RE: Problemas com disco externo - Ana - 02-07-2009, 00:43
RE: Problemas com disco externo - JCarvalho - 07-07-2009 23:54

Saltar Fórum:


Utilizadores a ver este tópico: 1 Visitante(s)