Colocar Resposta 
 
Avaliação do Tópico:
  • 0 votos - 0 Média
  • 1
  • 2
  • 3
  • 4
  • 5
D2D Recovery
15-05-2011, 18:49
Mensagem: #1
D2D Recovery
Boa tarde,

Tenho um Acer Aspire 5520 e a partição PQservice não funciona a comando ALT + F10 não resulta Mad, isto acontece por várias razões: tipo ter o Ubunto instalado, etc etc várias experiências feitas....

Eu segui este tutorial:

Citar:1. D2D Recovery is “Disabled” in the BIOS (Main menu).
FIX: Enabled it and try pressing ALT+F10 again as the computer boots.
2. The Acer hidden recovery partition (PQSERVICE) has been removed or damaged. If the disk drive is a replacement drive then you won't have this partition.
FIX: Unless you have previously imaged the PQSERVICE partition it will not be possible to use D2D recovery. You will need to restore from the Acer Recovery CD/DVD.
3. You have converted the FAT32 partition on the hard drives into NTFS. Acer D2D recovery won't be available if you perform this conversion. Ironic that NTFS is a more desirable disk format to use but Acer won't support this in their systems!
FIX: Restore your system from the recovery CD/DVD media.
4. The special Acer Master Boot Record (MBR) has become corrupt or has been overwritten with an non Acer MBR. As long as the PQSERVICE partition is there or you can get your hands on a couple of Acer service files for your model, then you can remake the special Acer MBR. Let's cover how this is done.

1. Disable D2D recovery in the BIOS. Can be found in the “Main” menu section. Save the BIOS settings and exit.
2. Log into Windows with an “administrator” level account.
3. Download ParTEDIT32.ZIP (registration required for download).
4. Extract PTEDIT32.EXE from the zip archive and run it.
5. Identify the PQSERVICE partition by its type or size. It is likely to be 12 or another custom value and is likely to be reasonably small in comparison to the other normal partitions - see the example below from a working factory default Acer. Click the Link below see the image full size. http://www.roundtripsolutions.com/bl...ntent/uploads/
6. 2007/10/AcerDiskRecoveryBroken_F031/hidden.jpg
Change the type to “07′ (Installable File System NTFS, HPFS) and “Save Changes”.
7. Reboot the computer and login with an “administrator” level account.
8. You should then be able to open up a command prompt and navigate to the PQSERVICE drive.
9. Enter the following command at the command prompt:
mbrwrdos.exe install rtmbr.bin
- You may have to search for these files and change into the relevant directory.
Note: This step writes the Acer MBR, with mbrwrdos.exe and rtmbr.bin being the special service files.
10. Close the command prompt window and reboot.
11. Go into the BIOS again and enable D2D Recovery. Save the BIOS settings and exit.
12. ALT+F10 should now start Acer Recovery as the computer starts.
13. The Acer MBR ensures the PQSERVICE partition is hidden therefore there is no need to reset the partition type back to 07 - well there shouldn't be if all has gone well. If you need to manually reset it then run PTEDIT32.EXE again, set the partition to 12, or whatever the original value was, and save the changes to complete the process. Reboot and it should now be hidden.

If Windows is unbootable, due to whatever issue, you can always use the Ultimate Boot CD for Windows (UBCD4Win) along with a copy of PTEDIT32.EXE to achieve the same results. Likewise, use UBCD4Win along with PTEDIT32.EXE if the PQSERVICE partition is being changed back to a hidden one by the existing MBR. We'll leave that as an exercise for those who need to do it! It has been pointed out in the comments that UBCD4Win already has an application that will do partition maintenance, so checkout TestDisc if you go down that road.
If this is a new drive or someone has completely wiped the drive, including the hidden partitions, it may be necessary to use partitioning software to recreate the partitions that the Acer Recovery system is expecting! You'll also need to restore an image of the recovery partition from a previously made backup, so it is worth making that backup image straight away while the laptop is still new and shiny, and certainly well in advance of any problem.
A final word or two of caution: take great caution when playing around with partitions on an Acer system… you have been warned… and remember to make the backup media disks as soon as you fire the computer up for the first time!

Não consigo fazer a partir do passo 8, quando entro no prompt só consigo chegar ao c:\ acho que devia entrar no E:\ que é onde está o PQSERVICE

Peço ajuda para fazer o que é pedido e também se alguém alguma vez fez a recuperação desta partição e se fez desta forma...

Obrigado.
Procurar todas as mensagens deste utilizador
Citar esta mensagem numa resposta
15-05-2011, 19:33
Mensagem: #2
Ubuntu RE: D2D Recovery
Olá,

Segundo refere já teve o Ubuntu instalado. Ainda o tem instalado na máquina? É que durante o arranque do PC, irá ver uma linha no GRUB que indica que tem um Windows instalado (no meu caso isso acontece, apesar de apenas ter o Ubuntu instalado e mantive a partição PQSERVICE intacta). Se tiver o Ubuntu instalado e aparecer a opção Windows, selecione o arranque através dele a ver se assim já consegue realizar a recuperação do PC.

Só uma info, eu possuo um emachines E520 (linha económica da Acer) e consigo aceder à partição através do Ubuntu. Se tiver os CD/DVD's de recuperação seria bem mais vantajoso, foi o que fiz e até hoje não tive problemas em restaurar o meu PC.

Outra informação, durante um dos restauros, reparei que os dados dos DVD's foram copiados para uma unidade designada por Z: pode ser que isto ajude.

Cumps.

wolfytuga
Para o que der e vier...
emachines E520 | Intel Celeron 2.0GHz | 32/64bit | RAM 2GB | HD 160GB | Intel Mobile 4 Express, 64MB → 1GB
Visitar Website de este utilizador Procurar todas as mensagens deste utilizador
Citar esta mensagem numa resposta
15-05-2011, 21:15
Mensagem: #3
RE: D2D Recovery
Já tive o Ubuntu instalado e penso que o problema começou ai, quando desinstalei, pelo que li a partição perdeu o MBR.

Desinstalei o Ubuntu para instalar o Windows 7, asneira não era original e então perdi os drives de tudo e mais alguma coisa, mas o principal foi a drive de DVD que não é reconhecida, não BIOS não aparece apesar de ela rodar o DVD mas não consegue ler.

Desde que conheço o pplware tinha deixado de utilizar programas não oficias mas a vontade de utilizar o 7 foi mais forte e, resultou numa grande asneira e complicação!
Procurar todas as mensagens deste utilizador
Citar esta mensagem numa resposta
16-05-2011, 10:39 (Esta mensagem foi modificada pela última vez a: 16-05-2011 10:44 por wolfytuga.)
Mensagem: #4
RE: D2D Recovery
Olá, sem dúvida que cometei um erro verdadeiramente fatal quanto ao Windows 7 (não original).
Quanto ao MBR, pode recuperá-lo a partir deste artigo. Quanto aos drivers, pode sempre descarregá-los a partir do site da Acer, eu tive de fazer o mesmo quando instalei o Windows 7 no meu.

Caso tenha problemas na leitura do LiveCD do Ubuntu, experimente recorrer a outro PC e gravar o Ubuntu numa Pen USB seguindo este artigo.

Cumps.
_______________________________
EDIT:
Por falar em Windows 7, bem, pela minha experiência, no início estava espectacular, mas depois comecei a ter alguns problemas no Touchpad, de cada vez que actualizava o Windows tinha de voltar a instalar o driver de origem do Touchpad, senão este empancava ou ficava todo marado.

wolfytuga
Para o que der e vier...
emachines E520 | Intel Celeron 2.0GHz | 32/64bit | RAM 2GB | HD 160GB | Intel Mobile 4 Express, 64MB → 1GB
Visitar Website de este utilizador Procurar todas as mensagens deste utilizador
Citar esta mensagem numa resposta
16-05-2011, 18:08
Mensagem: #5
RE: D2D Recovery
Já tenho o Ubuntu 11.04 numa pen, vou tentar o tutorial.

Já instalei todos os drives que a Acer tem disponível, só que diz que não encontra o hardware e na bios não aparece.
Procurar todas as mensagens deste utilizador
Citar esta mensagem numa resposta
12-05-2015, 10:05
Mensagem: #6
RE: D2D Recovery
thanks for the list guys. it'll really help me.
Procurar todas as mensagens deste utilizador
Citar esta mensagem numa resposta
12-05-2015, 15:19
Mensagem: #7
RE: D2D Recovery
(16-05-2011 18:08)patriota78 Escreveu:  Já tenho o Ubuntu 11.04 numa pen, vou tentar o tutorial.

Já instalei todos os drives que a Acer tem disponível, só que diz que não encontra o hardware e na bios não aparece.
Oi,

Se não aparece na BIOS não tem nada a haver com drivers. Possivelmente (por coincidência ou não) a tua unidade das duas uma.. ou está desactivada na BIOS ou está mal encaixada. A outra 
hipotese é a driver ter avariado...
Procurar todas as mensagens deste utilizador
Citar esta mensagem numa resposta
Colocar Resposta 


Saltar Fórum:


Utilizadores a ver este tópico: 1 Visitante(s)